Contact Us
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
ilya@scaffplan.com
Article
Last Month
It is possible to define a standard length to be used in a bay the most. Any standard length might be predefined as per scaffolding system specifications. Available in the Bay tool, Bird Cage, Wall Trace, Circular Tanks, and Stairs.
Timestamps 0:00 – Purpose0:56 – Inbuilt Features1:51 – Naming Conventions2:10 – Outro
Library of miscellaneous shapes now contains 3D workers. It is possible to add workers into the catalogue and add them over scaffolding for height references when needed.
Timestamps 0:00 – Defining Scaffold Layout Geometry1:16 – Closed Layout VS Opened Layout2:08 – Closed Layout8:14 – Opened Layout12:43 – Opened Layout Examples13:39 – Closed Layout Examples13:52 – Smart Insertion21:07 – Insertion Results 26:07 – Outro
Timestamps 0:00 – Introduction0:19 – Horizontal and Vertical Measurement1:56 – 3D Measurement3:12 – Measuring an Angle3:36 – Measure Arc Length4:00 – Erase (Remove) Measurements by Redraw View or Update Window 5:23 – Outro
Timestamps 0:00 – Introduction0:31 – Align Vertically or Horizontally 1:02 – Outro
Timestamps 0:00 – Introduction0:10 – Remove Lapping Bay and Merge Bays 0:38 – Outro
Timestamps 0:00 – Introduction0:38 – Creating Elevation View 1:08 – Adjust Grid Elevation Tool1:35 – Drawing Creation 2:10 – Outro
Timestamps 0:00 – Introduction0:14 – Creating Scaffold Bay Inline 0:50 – Bridging Scaffold Bays with Planks 2:28 – Bridging Scaffold Bays on Angles4:17 – Outro
Timestamps 0:00 – Introduction0:07 – Modelling Curved Wall by a Panel Tool0:26 – Panel: Corner Points for Rounding (Chamfer Points)0:51 – Modelling Concrete Polybeam1:15 – Concrete Polybeam: Corner Points for Rounding (Chamfer Points)1:52 – Outro
Timestamps 0:00 – Introduction0:35 – Symbol Insert 0:50 – Symbol Properties 2:25 – Symbol Copying3:07 – Symbol Along Line3:25 – Symbol Editor 5:28 – Outro
Timestamps 0:00 – Introduction0:11 – Guardrail Creation and Deletion 0:45 – Building Offset 1:56 – Outro
Timestamps 0:00 – Introduction0:32 – General Arrangement Properties1:59 – Layout Properties 2:26 – View Properties 3:32 – Detail View and Section View 3:52 – Dimensions 6:24 – Part Mark Properties 7:06 – Part Properties 9:39 – Grid Properties 10:21 – Reference Model List 10:47 – Filter Properties 11:39 – View Specific Properties 14:51 – Part Propert
Timestamps 0:00 – Introduction0:17 – Inserting a Component1:10 – Orthogonal Snapping and Orthogonal Shortcut 2:25 – Inserting a Component with Vertical Offset Using Temporary Snap 3:51 – Inserting a Component with Horizontal Offset Using Temporary Snap5:30 – Snapping Points on a Component6:17 – Inserting Component with Exact Offset Using Component C
Bay intelligence and modelling flexibility have been significantly improved allowing options to show, detach and remove via the bay profiles. It's especially beneficial for modelling when extra profiles are needed to be included in the bay by the Item tool. You can then show which profiles have been inserted, exclude some/all or detach them from the
Multiple bays creation feature significantly enhances convenience and speed of modelling. The contextual toolbar allows to enable the multiple bay creation on the fly. Preview on the insertion displays: - number of bays to be inserted - total length of the bay line - length & width of bays being used - top working platform height
Timestamps 0:00 – Intro 0:05 – Creating Cover for Roof 0:17 – Cover Shown in Gear List 0:22 – Outro
Bay handles allow now to move change bay length or width as an option in any direction. Extra handles for the reference line allow to move the whole bay in any direction (X, Y, Z and their combinations) or move just the selected reference line handle to reposition the bay end. Handles for lifts have been added. It is possible to add/remove decking a
Timestamps 0:00 – Introduction0:08 – Standard Sizes 0:56 – Outro
The intelligence of Layher FlexBeam system components has been significantly enhanced by introducing Create commands for components selected, and extra snapping points for the convenience of rapid and precise modelling in the system.
Timestamps 0:00 – Introduction0:08 – Creating Plan and Elevation Drawings1:37 – Looking Through Drawing 2:24 – Where to Open Drawings 3:42 – Outro
Timestamps 0:00 – Introduction1:05 – Work Plane Orientation and Creation3:42 – Specifying Work Plane Using Two Points 4:23 – Specifying Work Plane Using Three Points 4:56 – Work Plane Tool6:02 – Parallel to View Plane Command6:52 – Parallel to XY(Z) Plane Command8:10 – Outro
Timestamps 0:00 – Forming Bird Cage Layout0:48 – Inserting a Bird Cage2:00 – In-Line Option 2:38 – Chequered Option 3:05 – Bird Cage Modification 4:47 – Insertion in X and Y Axis Direction5:26 – Direct Modification Features 6:05 – Direct Modification Demonstration 7:28 – Outro
Timestamps 0:00 – Introduction0:31 – Purpose and Benefits 1:03 – General Concept: Stair Types 1:40 – Outro
Timestamps 0:00 – Intro0:21 – Copying Tube and Coupler with Tekla Copy0:38 – Picking Points with Tekla Copy0:50 – Using Flip in Contextual Toolbar0:57 – Using Tekla Copy Special > Linear1:18 – Using Scaffplan Smart Copy 1:25 – Smart Copy Process 2:03 – Increasing Amount of Copies with Smart Copy2:24 – Using Smart copy on Lattice Beams and Tube Co
The AT-PAC EU scaffolding system has been introduced, with all ScaffPlan tools being updated and working with AT-PAC EU as soon as the system is chosen under Project info.
It's now possible to report any company-specific components created by a user. Checkboxes introduced for each column in the data grid allow users to exclude/include data from a report generated. Company-specific components can be excluded from reporting if they don't need to be in the gear/yard list. Gear list opening is also much faster now.
Timestamps 0:00 – Introduction0:28 – Purpose and Benefits of the Lapping Bay Tool1:17 – Naming Conventions1:51 – Outro
Timestamps 0:00 – Introduction0:08 – Corner Arrangements Tool Options1:25 – Creating Corner Arrangement2:48 – Inner Guardrail Creation for All Bays 4:00 – Outro
Timestamps 0:00 – Introduction0:35 – Creating and Using Views1:45 – View Plane2:11 – Select a View2:26 – Creating Basic Views Using View Planes4:13 – View Creation Along Grid Lines4:53 – Open a View Created from the View List6:28 – Temporary and Permanent Views7:48 – Creating Views Using Two Points8:52 – Create View on Work Plane9:47 – Component and
Timestamps 0:00 – Topic0:45 – Overview6:18 – General Concept10:00 – Outro
Company-specific custom transoms and tubes can be created with ease using the parametric creation feature. Custom components created by a user might be located under the system profiles list for ease of access during modeling.
The search for Type and Profile fields implemented allows for a fast and easy way to find any component required.
The feature allows for rapid copying of profile attributes from one to another from the contextual toolbar. Previously, the Get properties and Modify commands needed to be performed from the Item tool user interface. Copy properties from one to another and from one to multiple profiles are also supported.
Timestamps 0:00 – Introduction0:09 – Access Bay Encapsulation Options0:15 – Encapsulation Options Overview0:44 – Inserting Bays1:05 – Open the Bay Menu for Multiple Bays Selected1:17 – Untick all Options for the Bay Menu1:10 – Multiple Bay Encapsulation1:26 – Create Encapsulation for Multiple Bays1:51 – Top and Bottom Extension of Encapsulation 2:24
FlexBeam Layher system components have been introduced for the U-Layher system under the Scaffold Item tool, allowing users to model the FlexBeam Layher system using the Scaffold Item tool.
It is possible to search scaffold component(s) in the list now. Selection ability from the list in the model or vice versa have been introduced allowing to select scaffold components in the model from the list or from the model filter and highlight components in the list. It is possible to define a custom name for gear and yard lists adding prefixe
Timestamps 0:00 – Opening Tekla Warehouse in Browser0:45 – Locating Refence Model Scale Extension1:25 – Downloading Version Specific Extension1:50 – Starting TSEP Installation 2:35 – Reopening Tekla3:06 – Locate Reference Model Tool3:21 – Outro
Timestamps 0:00 – Introduction0:12 – Creating Wall Trace0:43 – Wall Trace Properties 1:07 – Wall Trace Outer Corner Arrangements 3:30 – Wall Trace Inner Corner Arrangements 4:50 – Inserting Bays 5:49 – Wall Trace Inner and Outer Corner Arrangements7:01 – Outro
Timestamps 0:00 – Introduction0:24 – Encapsulation Sheet Width and Extension1:32 – Outro
Timestamps 0:00 – Introduction0:32 – Purpose and Benefits of the Bay Tool1:18 – Outro
Timestamps 0:00 – Introduction0:08 – Console Bracket Overview 1:05 – Inside Console Bracket Creation 2:12 – Outro
Timestamps 0:00 – Introduction0:42 – Inserting Couplers on Vertical Member3:32 – Inserting Couplers on Horizontal Member 5:39 – Outro
Timestamps 0:00 – Introduction0:18 – Containment Mesh for Multiple Scaffold Bays0:47 – Select Containment Mesh Type and Create Containment Mesh1:12 – Visual Grid Option and Visual Grid Visibility in the Model1:50 – Outro
Timestamps 0:00 – Introduction0:30 – Inserting Scaffold Components 1:04 – Changing Scaffold Component with Toolbar1:32 – Scaffold Component Rendering2:40 – Component Rendering Shortcuts2:48 – Copy and Mirroring Scaffold Objects3:12 – Copying from Ribbon 3:49 – Copy Special Linear4:44 – Copy Special Rotate 5:44 – Copy Special Mirror 6:15 – Copy and M
Extra flexibility options for covering gaps in between bays have been added to the Scaffold Item tool. Planks with input options available in the contextual toolbar for decking profiles and console brackets provide the ability to generate planks to cover gaps in between bays (elevations under 5 degrees are also supported). The option also allows use
Timestamps 0:00 – Introduction0:32 – Dimension Properties General2:42 – Dimension Properties Appearance 3:31 – Dimension Properties Marks 4:44 – Dimension Properties Tags 5:34 – Outro
Timestamps 0:00 – Introduction0:10 – Point Clouds Menu Overview0:58 – Finding Point Cloud File 1:06 – Attaching Point Cloud1:38 – Point Cloud Example 2:02 – Point Cloud Positioning2:22 – Point Cloud Rotation3:00 – Point Cloud Offset 3:40 – Point Cloud Visualization Settings4:10 – Outro
Timestamps 0:00 – Features1:50 – Reports Location 2:14 – Leg Loads Report3:16 – Scaffold Tie Register4:32 – Outro
Timestamps 0:00 – Introduction0:36 – Section View Creation Requirements1:05 – Section View Selection and Cut Depth1:53 – Section Symbol Properties Cutting Line 2:09 – Section Mark and Placing Text2:48 – View Label Settings 3:05 – New Section View Properties 3:50 – Section Cut Modification 4:52 – Outro
Timestamps 0:00 – Introduction0:05 – Searching for Drawings 0:40 – Searching for Multiple Drawing Types1:15 – Outro
Timestamps 0:00 – Introduction0:49 – Calling Scaffolding Tools Menus 2:38 – ScaffPlan Tools User Interface3:20 – Save Settings for a Tool5:53 – Get Option in User Interface7:05 – OK and Apply Options in User Interface8:48 – Outro
3 ways of components selection allow bulk manipulation of components with high speed and accuracy in any scenario you might face while modeling: Select from a list Select similar Select from the Gear list.
Timestamps 0:00 – Introduction0:12 – Bracing Creation and Direction1:06 – Height (Top Platform)1:43 – Outro
The Tube & Clip tool automates modelling process for tube and clip scaffold creating tube and fittings in between tubes being picked by simply 2 points clicked in the model. The tools handles any scenario with high speed and accuracy. Tube & Clip bays allows faster and more efficiently to built Tube & Clip bays with a set of blocks avai
Timestamps 0:00 – Introduction0:14 – Lapping Bay Configuration Overview 0:50 – Specific Selection1:20 – Bottom Inner Tube 1:45 – Outro
Enhancing usability and clarity the Coordinate manipulator on all components has been introduced. It allows clearly see positioning of a component XYZ axis in 3D space for further manipulations such locking the component axis for copy, move and rotate commands. The manipulator has direct modification features for rapid smart copy, move and rotate
Timestamps 0:00 – Introduction0:09 – Creating ScaffPlan Objects1:12 – ScaffPlan UI and Item Tool2:23 – Switching Hierarchy Levels3:15 – Insuring Item Tool used with Select Components Only3:44 – Convert Item to ScaffPlan Component (Convert to Scaffold Components)5:00 – ScaffPlan Scaffold Bay Hierarchy6:40 – Access Scaffold Component in a Bay 6:46 – C
Timestamps 0:00 – Introduction0:09 – Lapping Bay Insertion 0:40 – Automatic Lapping Bay Settings2:00 – Working Custom Lapping Bay Length3:02 – Automatic Tube Length 3:45 – Working Custom Tube Length4:32 – Lapping Bay Automation4:59 – Moving Bay with Automatic Lapping Bay6:14 – Guardrail Creation7:39 – Top Ring Creation8:07 – Console Brackets8:42 – B
Timestamps 0:00 – Introduction0:11 – Opening Tube Connector Tool with Shift0:19 – Set Multiple Components to NO0:22 – Adjusting Settings to Desired Settings0:35 – Using Temporary Snap to Insert Components with Offset1:08 – Using Tekla Commands to Copy Special > Linear1:25 – Adjusting Copy Settings1:37 – Copying Components in Y-Direction1:52 – Usi
Timestamps 0:00 – Introduction0:17 – General Parameters 0:31 – Bay Configuration 1:16 – Standard Sizes, Sole Boards and Ledgers/Transoms 1:49 – Guardrails, Bracing and Top Rings 2:17 – Console Brackets, Encapsulation and Containment Mesh 2:46 – Lapping Bay Configuration 3:10 – Wall Ties3:22 – Outro
It is much easier to move and smart copy scaffold components in different directions. By locking X, Y or Z directions selected component(s) might be moved or smart copied (with hold down Alt or Ctrl) in a defined locked direction only. The lock direction contextual toolbar is available with a click at the component start/end points or by clicking on
Timestamps 0:00 – Introduction0:13 – Lattice Beam Options Overview 0:25 – Lattice beam Height1:00 – Lattice Beam Automatic Option1:31 – Lattice Beam Manual Measurements2:17 – Create Connections 2:46 – Lattice Beams Insertion Picking Order4:08 – Alternative Picking Order 4:49 – Lattice Beam Insertion on Perpendicular Scaffold Bays 5:07 – Flipping Lat
Timestamps 0:00 – Bay Insertion Concept0:10 – First and Second Point of a Bay Insertion1:12 – End 1 and End 2 of a Bay1:26 – Bay Inner and Outer Sides1:52 – Bay Naming Conventions2:21 – Insert Bay Along Wall2:30 – Define Bay Length on Insertion3:16 – End 1 (Left) and End 2 (Right) Bay Ends4:14 – Outro
Timestamps 0:00 – Custom Item Tool UI1:07 – Custom Item Tool Toolbar 3:31 – Outro
Timestamps 0:00 – Introduction0:14 – Changing Tube 2 Length0:30 – Using Move Neighbors Command to stop Clashing0:58 – Merging Tube Vertically1:20 – Outro
Timestamps 0:00 – Introduction0:52 – Select Similar Components to Add to Bay 1:30 – Copying the Bay with Added Components1:44 – Outro
Timestamps 0:00 – Introduction0:12 – Creating New Custom Item1:19 – Outro
Timestamps 0:00 – Introduction0:16 – Copying Components Using Centreline1:42 – Copying Multiple Components2:35 – Copying Component Properties3:41 – Copying Object from Start and End Points 5:19 – Copying from Object to Object6:21 – Outro
Timestamps 0:00 – Inputs0:41 – Picking Order for Calculations 1:17 – Outputs 2:01 – Reports Location 2:27 – Wind Calculations4:08 – Failed Wind Load Reports4:56 – Rerun Wind Calculations 5:22 – Wind Load Reports5:42 – Outro
Timestamps 0:00 – Introduction0:37 – Copy Bay from End 1 or End 2 1:15 – Copy Bay to Outer Side or Inner Side 2:20 – Outro
Timestamps 0:00 – Introduction 0:11 – Insertion of Swivel Couplers 0:42 – Creating Tubing Between Swivel Couplers 1:01 – Adjust Swivel Coupler Orientation with Tubing1:45 – Changing Tube Length1:59 – Showing Lattice Beam Centre Line2:10 – Inserting Swivel Couplers on Lattice Beams2:54 – Coupler Orientation 3:20 – Creating Tubing on Lattice Beam3:
Timestamps 0:00 – Introduction0:18 – Inquiring Menu0:42 – Inquiring Object1:23 – Custom Inquiry1:38 – Inquire Point Coordinates 2:17 – Inquire Phases Used2:33 – Inquire Model Size2:41 – Outro
Timestamps 0:00 – Introduction0:27 – Creating Buttress Bay1:18 – Adjusting Buttress Bay3:20 – Outro
Timestamps 0:00 – Intro 0:10 – Export Options in Tekla Menu0:27 – Export 3D DWG/DXF (Old Exportation)1:05 – Unsupported Things in Old Exportation1:21 – Export 3D DWG (New Exportation)2:38 – DWG File in Directory2:49 – Using Trimble Connect to View DWG2:57 – Outro
Timestamps 0:00 – Introduction1:35 – Moving and Pinning Contextual Toolbar 2:31 – Changing Scaffold Item Component 3:27 – Using Contextual Toolbar for Bay4:15 – Modifying Toolbar 6:03 – Outro
Learning outcomes Purpose of a model template How to save a model as a template Create a new model using template Model template default location Model template distribution Model template path and user.ini file Timestamps 0:00 Purpose of a Model template 0:35 How to save a model as a template 1:19 Create a new model using template 2:03 Model tem
Timestamps 0:00 – Introduction 1:13 – Changing Bay Visibility 2:00 – Calling Report 3:09 – Drawing Creation3:38 – Overview and Outro
Timestamps 0:00 – Introduction0:31 – Drawing Ground Levels 1:14 – Adjust Bays to Line 1:34 – Manual Bay Adjustment 2:24 – Wall Trace Elevation Adjustment 2:57 – Lifting Bays 3:40 – Outro
Timestamps 0:00 – Introduction0:27 – Project Info1:08 – Scaffold Item Tool3:06 – Scaffold Bay Tool4:18 – Corners Tool for Scaffold Bay 4:50 – Wall Trace Tool5:26 – Bird Cage Tool 5:53 – Tank Tool 6:07 – Stairs Tool 6:41 – Cont. Mesh Tool 7:10 – Wall Tie Tool7:41 – Gear List Tool 8:40 – Certificates Tool9:21 – Utilities Tool9:50 – Draw Info Tool10:36
Timestamps 0:00 – Introduction0:20 – Changing Profile Type with Contextual Toolbar1:50 – Outro
Convenience and speed of modelling has been enhanced further introducing multiple components creation in one go. The contextual toolbar on the component insertion allows to enable the multiple components creation feature on the fly. It's specifically convenient when multiple standards required to be created in a stack with just 2 points clicked in
Learning outcomes Export the 3D model to an IFC format for sharing. Location of the IFC model after the export. Access to the Trimble Connect web version. Create a new project in Trimble Connect. Upload IFC to Trimble Connect project. View the IFC in Trimble Connect web. Navigate in Trimble Connect web. Measure distances, create markups, cut planes
Timestamps 0:00 – Introduction0:09 – Avoiding Custom Item Loss with Backups1:24 – Outro
A preview feature of the bay height has been further enhanced allowing to switch representation of the top working platform height or lift heights for clarity if required.
Timestamps 0:00 – Introduction0:22 – Coupler Rotation Around Axis1:22 – Rotate a Coupler by Native Tekla Rotation2:41 – Rotate a Coupler by ScaffPlan Contextual Toolbar Rotation3:36 – Contextual Toolbar Swap and Mirror4:24 – Rotating Around Start and End Points4:37 – Outro
Timestamps 0:00 – Introduction0:09 – Mirroring Double Couplers 0:25 – Mirroring Brace Orientation 0:48 – Bracing Swap Command1:05 – Outro
Timestamps 0:00 – Introduction0:08 – Opening Component Dialogue0:19 – Modifying Inserted Component 1:07 – Contextual Toolbar for Tube Connector1:55 – Using Contextual Toolbar to Change Joiners2:13 – Outro
PERI UP scaffolding systems have been introduced with all ScaffPlan tools available. Engineering module for the Peri Up system is not supported yet.
Timestamps 0:00 – Intro 0:13 – Inserting Roof with Temporary Snap 0:37 – Configuring Roof Properties Before Insertion 1:03 – Outro
Timestamps 0:00 – Introduction0:36 – Creating Wall Trace0:54 – Searching for Components in a Model1:30 – Searching Components in Selected Areas of a Model2:10 – Outro
Timestamps 0:00 – Introduction0:20 – Moving Bay Face to Wall1:27 – Moving Bay to Slope Face2:09 – Scaffold Items on Slope for Sloped Bay 4:27 – Outro
Timestamps 0:00 – Purpose of the tool0:21 – Naming conventions1:44 – Outro
Timestamps 0:00 – Introduction0:07 – Custom Items Backup Files and Sharing2:00 – Outro
Timestamps 0:00 – Introduction0:17 – Lapping Plank Length1:22 – Tube Length and Bottom Inner Tube2:08 – Outro
Timestamps 0:00 – Introduction0:21 – Drawing Editing 1:46 – Properties Editing 2:22 – Outro
Over 230 components have been embedded into the Item Tool providing rapid and consistent modelling utilising the intelligence of the tool. Extra components have been introduced for Layher, Kwikstage and AT-PAC, plus some common components available across all systems. Please see the full spreadsheet with the list of profiles added here .
Timestamps 0:00 – Introduction0:07 – Profile List Overview0:54 – Changing 2m Standards to 3m1:24 – Timber Sole Boards to Steel Sole Boards2:01 – Outro
Timestamps 0:00 – Intro 0:09 – SketchUp Exportation 0:16 – Export Parameters0:29 – Export Advanced 0:54 – Viewing File in Folder1:07 – Opening Sketchup File in Trimble Connect1:22 – Outro
Timestamps 0:00 – Introduction0:17 – Guardrail Overview0:39 – Removing Guardrails1:10 – Inner Guardrail Options1:36 – Outer Guardrail Options 1:59 – Inner Guardrails and Building Offset 3:20 – Outer Guardrail Tubes for a Corner Option 3:41 – Outro
Timestamps 0:00 – Introduction0:17 – Inserting dwg/dxf1:25 – Inserting Images3:05 – Linking to Another Drawing 3:55 – Hyperlinks 4:44 – Outro
The feature allows users to model swivel couplers and rotate the swivel head to suit an angle specified angle or auto-adjust the positioning of the head according to the picked component it will connect to.
Timestamps 0:00 – Introduction0:08 – Hatch Stair Creation1:57 – Demonstration Scaffold Bay2:45 – Creating Hatch Stairs3:27 – Flip Hatch Stair 3:57 – Hatch Stairs at Lifts4:42 – Outro
Timestamps 0:00 – Introduction0:30 – Associate Symbol 1:23 – Changing Model 2:07 – Moving Text and Measurement Extension 3:15 – Add Dimension Point3:50 – Combine Dimension and Running Dimension4:21 – Link Dimensions 4:40 – Outro
Timestamps 0:00 – Introduction0:11 – Timber and Steel Sole Boards for a Bay0:40 – Change Sole Board Types0:52 – Outro
Scaffold components geometry has been optimised. High and Medium representation of scaffolding components has been introduced. From now on 3D modeling and 2D drawing creation performances have been significantly improved. It is about 3 times faster to create drawings on Hight detail and about 10 times faster on Medium detail. The scaffold component
The AT-PAC US scaffolding system has been introduced with all ScaffPlan's tools available for use with the system when selected under Project info.
Timestamps 0:00 – Introduction0:25 – Copying Tube with Tekla Copy0:36 – Tekla Copy Process0:57 – Continue Copying or Interrupt Copying1:03 – Using Tekla Copy Special > Linear Command1:15 – Adjusting Copy Special Settings1:27 – Copying by Different Axis1:39 – Using Scaffplan Smart Copy 2:20 – Specifying Copy Amount with Contextual Toolbar2:50 – Us
The logic of the corner tool has been refactored The corners tool now adds extra bays on 2 perimeters without changing the whole perimeter for each line. Extra profiles have been added for Kwikstage The following list of profiles has been added to the Item tool for Kwikstage: 1.2m Hoarding Truss 1.8m Hoarding Truss 2.4m Hoarding Truss C Coupler Step
Timestamps 0:00 – Introduction0:18 – Purpose and Benefits of the Lattice Beam Tool0:51 – Naming Conventions1:20 – Outro
Timestamps 0:00 – Introduction3:10 – Input and Picking Order Demonstration 4:24 – Containment Mesh Insertion on Multiple Bays 6:07 – Containment Mesh Insertion on Right Side Open Bay6:41 – Containment Mesh Insertion on Enclosed Bay7:00 – Containment Mesh Insertion on Left Side Open Bay7:22 – Containment Mesh Along Whole Wall Trace8:33 – Containment
1 & 2-meter construction stairs have been introduced for the Kwikstage system, offering a fast and easy way of modelling stairs.
Timestamps 0:00 – Introduction0:10 – Hierarchy Level 00:33 – Access Item Tool in the Bay by Changing Hierarchy Level from 0 to 1 0:59 – Create Double Coupler by Accessing Standard in a Bay2:19 – Create Bracing by Accessing Standard in a Bay2:50 – Outro
Timestamps 0:00 – Introduction0:05 – Creating Empty Drawing 0:38 – Outro
Timestamps 0:00 – Introduction0:17 – Standard Size Modifications 0:33 – Outro
Timestamps 0:00 – Intro0:15 – Moving Tube and Coupler with Tekla Move0:52 – Tekla Move Special > Linear1:54 – Align Tube and Couplers with Move Special > Linear2:34 – Using Scaffplan Smart Move3:00 – Smart Move Automatic Length Adjustment 3:28 – Moving Swivel Coupler End Point3:57 – Outro
Compatible Tekla Structures versions & recommended service packs: 👉 Tekla Structures version 2023 Service Pack 5 👉 Tekla Structures version 2022 Service Pack 11 🚀 Key Features 🚀 💥 Snapping to reference models improvements 💥 System: PERI UP available 💥 System: Proscaf available 💥 Tube & Fittings enhancements 💥 Temporary Roof available 💥 Bay
Timestamps 0:00 – Introduction0:17 – Purpose and Benefits of the Tube & Clip Tool0:48 – Naming Conventions1:06 – Outro
Timestamps 0:00 – Introduction0:12 – Example Drawing 0:54 – Creating Lines in Drawing1:15 – Creating Notes in Drawing 2:04 – Section Mark and Dimensions2:57 – Selection Menu3:10 – Select Lines in Drawing 3:28 – Select Text in Drawing3:57 – Select Marks and Notes 4:06 – Select Parts in Drawing 4:26 – Select Section Symbol in Drawing 4:35 – Select Dra
Timestamps 0:00 – Introduction0:21 – Changing Item Detail0:38 – Drawing Creation Speed1:07 – Outro
Timestamps 0:00 – General Concept and Inputs1:03 – Inner Corner – Option 17:09 – Inner Corner – Option 211:31 – Inner Corner – Option 313:10 – Inner Corner – Option 414:10 – Outro
Timestamps 0:00 – Stair Types0:37 – Stairs Attached to a Bay 2:10 – Independent Stair Towers 2:34 – Direct Modification Features3:16 – Stairs Overview4:39 – Stairs Attached to a Bay6:48 – Stairs on Wall Trace7:56 – Inserting Stretcher Stairs 9:35 – Direct Modification Overview 10:10 – Inserting Independent Stair Tower 11:38 – Outro
Timestamps 0:00 – Introduction0:35 – Purpose and Benefits 1:23 – List of Videos to Watch Prior 1:54 – General Concept: Forming Circular Tank Layout 2:24 – General Concept: Naming Conventions 2:55 – Hierarchy of the Circular Tank Tool3:57 – Outro
Timestamps 0:00 – Introduction0:24 – Button Locations0:40 – Select Objects in the Model 2:28 – Show Drawing Containing Selected Parts3:31 - Outro
Timestamps 0:00 – Introduction0:11 – Containment Mesh Overview 1:02 – Model Overview 1:20 – Outro
Timestamps 0:00 – Wall Trace Direct Modification Features 1:26 – Wall Trace Point Handlers4:35 – Wall Trace Midpoint Handlers6:31 – Wall Trace Measure Line Handler 9:07 – Wall Trace Wall Line Handler 12:54 – Wall Trace Contextual Toolbar 17:25 – Outro
The Bay Tool functionality has been enhanced, allowing users to speed up bay-by-bay modelling by copying a selected bay to the inner and outer side of the bay.
Timestamps 0:00 – Intro 0:10 – What is IFC (How it Works)1:27 – Exporting IFC in Tekla Menu 1:45 – IFC Exportation Menu 2:24 – IFC Parameters 2:44 – IFC File Pathway 3:15 – IFC Formats4:22 – Export Type 5:12 – Additional Property Sets5:56 – Export Selected or Whole Model 6:16 – IFC Location By 6:48 – Export IFC Advanced 6:53 – Object Types (Choose t
Timestamps 0:00 – Introduction0:29 – Showing Drawing Grids 0:38 – Level Marks1:15 – Level Marks Selection 1:50 – Moving Level Mark2:06 – Level Mark Properties2:12 – Level Mark Text2:58 – Level Mark Numerical Format 3:30 – Level Mark Appearance (Colour/Font/Angle/Frame)4:26 – Level Mark Settings Save4:57 – Datum Level6:14 – Outro
Timestamps 0:00 – Introduction to Tekla0:20 – Placing a Scaffolding Bay0:57 – Rotating in 3D Model1:48 – Automatic Rotation Centre 2:02 – Automatic Rotation Centre Settings2:48 – Navigate Command Rotate with Mouse3:43 – Set View Point 4:08 – Pan in the model5:32 – Switching to True View in 3D Model6:12 – Outro
Timestamps 0:00 – Activating Tube Connector0:18 – Tube Connector Help Info0:27 – Saving and Loading Presets1:13 – Exiting Tool1:20 – Get and Modify Buttons1:55 – Tick Box Button 2:07 – Apply and OK Buttons2:34 – Tube Connector Properties3:01 – Tube and Custom Tube Lengths3:36 – Outro
Timestamps 0:00 – Introduction0:14 – Inserting Bays Perpendicular to Each Other0:50 – Accessing Bay Item Tool to Create Planks 1:11 – Plank Insertion Options1:38 – Bridging Bays Perpendicular with Planks 2:28 – Bridging Bays on Angles with Planks3:04 – Creating Planks with Specified Direction and Distribution4:17 – Outro
Timestamps 0:00 – 3D Objects Supported for Extrusion 1:38 – Importing Reference Model from Folder 2:01 – Opening Model in Tekla2:47 – Creating New View 3:13 – Creating Start and End Points 3:46 – Adding Reference Model as Custom Item3:59 – Custom Item Properties 5:24 – Inserting Item with Start and End Points6:04 – Custom Item Properties 6:35 – Call
Timestamps 0:00 – Intro 0:08 – Bracing Configurations 0:32 – Outro
Timestamps 0:00 – Introduction0:22 – Printing Drawing from Model0:49 – Print Drawing from Document Manager 1:03 – Printing Multiple Drawings 1:20 – Printing Drawing from File Menu 1:53 – Print Drawings Dialogue Overview3:18 – Printing to PDF and Print Settings3:26 – PDF Print Location3:36 – Revision Marks3:52 – Options after Creation 4:14 – Prefi
Timestamps 0:00 – Width and Nominal Width Correspondence 0:46 – Overview of Current Width Settings 1:08 – Changing Width to Next Width Option 1:26 – Referring Back to Correspondence Table 1:50 – Using Contextual Toolbar to Change Width 2:07 – Changing Width by Selected End 2:26 – Nominal Width is Updated Automatically 2:37 – Changing Width from Lef
Timestamps 0:00 – Introduction to Tekla0:16 – Welcome Window 0:51 – Tekla User Assistance1:30 – Naming a New Model2:32 – Model Creation Location2:55 – Model User Settings3:50 – Model Template 4:08 – Recent and All Models Tabs4:49 – Creating the Model6:04 – Model Saving Options7:00 – Opening Models7:45 – Outro
Timestamps 0:00 – Introduction0:10 – Load ScaffPlan Contextual Toolbar Settings0:18 – Select Similar Components from a Selected Area (from Selected Objects)1:06 – Opening Profile List in Contextual Toolbar 1:27 – Swapping Selected Components in Profile List1:41 – Select Similar Components in Model 2:02 – Swapping Selected Transoms to Lattice Beam (H
Timestamps 0:00 – Introduction0:14 – Default Shortcuts 1:08 – Shortcut Commands List1:31 – Temporary Graphics 3:30 – Creating Redraw View Shortcut4:35 – Outro
Timestamps 0:00 – Relation of Model and Drawing Views 1:09 – Work Area Control 5:33 – Looking at Model in 3D7:06 – View List Overview 7:41 – Opening Multiple Views 7:59 – Creating New Views8:36 – Work Area Command 8:58 – Work Areas Using Two Points 9:30 – Fitting to Entire Model (Exiting Work Plane)9:47 – Creating View Plane 10:40 – Creating Drawing
Timestamps 0:00 – Introduction0:08 – Locking Drawing1:18 – Freezing the Drawing3:25 – Mark Drawing for Issue 4:09 – Outro
Timestamps 0:00 – Intro0:10 – Show Dimensions Feature0:28 – Show Input Points0:48 – Show Snapping Points1:09 – Selecting Scaffold Item1:33 – Create Command to Create Planks1:46 – Outro
Timestamps 0:00 – Introduction0:53 – Property Pane for Column 2:04 – Component Pane for Scaffold Item 2:36 – Part Selection for Scaffold Item3:51 – Custom Inquiry 4:56 – Tekla Online5:53 – Point Clouds 6:19 – Reference Models 7:00 – Applications and Components7:58 – Pane View Editing 9:27 – Outro
Timestamps 0:00 – Introduction0:39 – Construction Lines Insertion 1:23 – Construction Line Direct Modification 2:11 – Construction Line Magnetic 3:56 – Construction Line Colour 4:27 – Copy Paste Properties Between Lines 5:02 – Extension5:23 – Line Type5:35 – Drag and Drop Insertion Points in 3D6:02 – Insert Construction Planes7:01 – Construction Pla
Timestamps 0:00 – Intro 0:07 – Roof Systems 0:18 – Opening Tool 0:30 – Roof Insertion 0:38 – Opening Properties After Insertion 0:53 – Properties Overview 1:02 – Saving Settings 1:18 – Closing Dialogue 1:24 – Get and Modify Buttons 1:34 – Apply and OK Button 2:00 – Roof Type 2:06 – Roof Width and Nominal Width 2:45 – Support Type 2:53 – Number of
Creation of base plates has been enhanced by: a) introducing ability to create base plates on any end of a standard or tube by he end defined on the contextual toolbar b) U-Jacks creation on start or end of a tube or standard supported c) if baseplate RL is longer that the jack thread then a standard or tube will be moved with the standard/tube to g
An option for the creation of a bay without decking has been introduced for the Scaffold bay, Wall trace, Birdcage, and Circular tank tools - all platforms at lifts can now be removed.
Compatible Tekla Structures versions & recommended service packs: 👉 Tekla Structures version 2022 Service Pack 9👉 Tekla Structures version 2021 Service Pack 12 🚀 Key Features 🚀 Up to 10x faster performance Cuplock added Tube&Fittings scaffold Custom lift heights Custom vertical standards lengths New selection commands Instructor side p
Timestamps 0:00 – Introduction0:10 – Inserting Item Template0:59 – Creating Points1:29 – Inserting Beam 2:29 – Creating Custom Item 3:33 – Outro
The rotation command is now available on the contextual toolbar for components and provides direct access to the rotation of the component at 0-, 90-, 180-, and 270-degree angles.
Timestamps 0:00 – Introduction0:08 – Importing ScaffPlan Miscellaneous Items 1:09 – Outro
Timestamps 0:00 – Introduction0:16 – Decking Type 0:38 – Brace at Each N Segment 1:00 – Create Guardrails and Bracing 1:31 – Contextual Toolbar 1:47 – Outro
Timestamps 0:00 – Introduction0:24 – Creating a Clip Plane1:36 – Deleting Clip Plane 1:57 – Outro
Timestamps 0:00 – Introduction0:17 – Copying Drawing List to Excel 0:59 – Outro
The learning experience of ScaffPlan is now easier with the Instructor side pane window. The instructor shows instructions for the currently active tool. The Instructor side pane window provides • short example animations on how to use the tool • steps on how to use the tool • a short description of the tool • links to more comprehensive videos and
Timestamps 0:00 – Introduction1:01 – Modelling Panels5:46 – Modelling Slabs7:01 – Undo History7:48 – Modelling Lofted Slab 9:08 – Modelling Steel Columns9:40 – Modelling Beams 10:20 – Modelling Steel Polybeam and Curving Polybeam10:52 – Tekla Components 11:11 – Copy, Move and Rotate Tekla Commands11:58 – Copy an Object12:18 – Copy Special: Linear Co
Timestamps 0:00 – Introduction0:09 – Flip Bay Handles Command (Swap Attached Stair to Other Side of a Bay)1:12 – Swap Bay Handles Command (Mirror a Bay Around its Centreline)2:30 – Mirror Bay Handles Command (Mirror a Bay Around its Reference Line)3:44 – Outro
Timestamps 0:00 – Topics 0:39 – Purpose 1:02 – Outro
Timestamps 0:00 – Introduction0:16 – Scaffold Location 0:53 – Inner Tank Radius and Tank Creation2:06 – Wall Thickness and Tank Height 3:02 – Bay Configurations (Height of Top Platform)3:48 – Outro
Timestamps 0:00 – Introduction0:11 – Swap Handlers Command 0:25 – Changing Hierarchy to Individual Tube Level0:52 – Using Contextual Toolbar for Tubes1:02 – Adding Double Coupler from Contextual Toolbar1:23 – Showing Snapping Points1:52 – Hiding Snapping Points1:59 – Outro
Timestamps 0:00 – Introduction0:12 – Document Manager Columns Overview 2:07 – Hiding Categories 2:53 – Arrange Columns Lowest/Highest 3:34 – Outro
Timestamps 0:00 – Introduction0:49 – Invert Document Visibility 1:13 – Used Drawing Categories 2:08 – Outro
It is now significantly faster to switch profile types using the Type drop-down, allowing you to switch between profile types on the fly. Previously, this option was available from the Item tool interface only.
Timestamps 0:00 – Introduction0:08 – Lapping Plank Length Settings0:42 – Tube Length Settings1:06 – Inner Tube Creation 1:25 – Outro
Timestamps 0:00 – Introduction0:17 – Adjusting Lapping Bay 1:21 – Adjust Bay to Another Bay 2:02 – Outro
Custom lift heights have been introduced allowing you to move the lift at any available height in between lifts with a modular distance of rosettes/stars. It's available in the Bay tool, Bird Cage, Wall Trace, and Circular Tanks.
Timestamps 0:00 – Introduction0:05 – Top Ring Overview 0:21 – Top Ring Creation 1:22 – Outro
Timestamps 0:00 – Introduction0:20 – Moving Toolbar0:47 – Inserting Scaffold Standards1:40 – Selection Options 2:05 – Window Selection2:41 – Crossing Window Selection4:10 – Placing Item Component4:49 – Selection Options5:51 – Select Components Symbol 6:20 – Select Parts 6:52 – Select Objects in Component7:24 – Difference Between Part and Component S
Implementation of Inner guardrails option on the bay side when the inner console is on Mirror option for couplers has been added Standard system-specific settings with improved user experience introduced Improved Smart copy command Enhanced automation of the work area update
Timestamps 0:00 – Introduction0:09 – Instructor Pane 0:35 – Outro
Timestamps 0:00 – Topics0:22 – Purpose0:50 – Reports Location 1:12 – Outro
Timestamps 0:00 – Introduction0:22 – Create Drawing 0:42 – Detail View 1:25 – Detail Symbol Properties 2:32 – Detail View Properties 2:56 – Creating Note 3:09 – Outro
Timestamps 0:00 – Purpose of the tool 0:34 – General Naming Conventions 2:06 – Direct Modification Features: Point and Line Handlers 3:05 – Outro
Timestamps 0:00 – Intro0:17 – Direct Modification Tube End0:29 – Modifying End Handler Couplers0:51 – Line Handlers Used for Moving or Smart Copy1:04 – Outro
Timestamps 0:00 – Introduction0:09 – Sole Board Material 0:37 – Outro
Timestamps 0:00 – Intro 0:08 – Rotating Roof Around Insertion Point 0:25 – Using Contextual Toolbar for Rotation 0:42 – Outro 0:42 – Outro
Timestamps 0:00 – Introduction0:47 – Project Info Overview0:58 – Project Info Save Settings 1:23 – Project Info Help Button2:06 – Scaffolding System 2:28 – Supplier Details 3:39 – Client Details 3:44 – Project Details 4:40 – Scaffolding Details 5:15 – Drawing Info 6:27 – Outro
Bay tool: Enhanced behavior of added & removed components. The behavior of added/removed components to/from a bay is more robust. A bay with added & removed components can be copied, moved, and rotated holding them all as configured by a user. Bay tool: Merge bays. The Merge bays command is now available on the contextual toolbar allowing to
The AT-PAC US scaffolding system has been introduced with all ScaffPlan's tools available for use with the system when selected under Project info.
Timestamps 0:00 – Introduction0:06 – Bracing Overview0:52 – Create Bracing Along Whole Bay1:27 – Bracing Direction (Mirroring)2:00 – Brace at Ends2:34 – Changing Bracing for Individual Bays 3:15 – Outro
Timestamps 0:00 – Intro0:16 – Using Flip Command in Contextual Toolbar0:45 – Flipping with Multiple Selections 0:58 – Flipping at One End1:16 – Outro
The Buttress Bay tool has been introduced, allowing users to model the full buttress bay(s) in one go with all profiles generated by specifying the maximum number of bays to be generated. It also supports direct modification features. The tool recognises the configuration of the main bay it's attached to and adaptively reacts to the main bay geometr
Timestamps 0:00 – Introduction0:27 – Associated Notes1:32 – Associated Notes Overview 1:40 – Note Text 1:46 – Text Sequence/Ordering 2:00 – Stacking Text2:17 – Adding Weight to Note 2:52 – Adding More Notes 3:01 – Note Appearance4:02 – Associated Note Automation4:58 – Note Without Leader Line and Along Line5:45 – Outro
Timestamps 0:00 – Introduction0:02 – Inputs for Gear & Yard Lists0:35 – Example of Drawing Gear List 1:14 – Settings3:31 – Settings Tab in Model 5:20 – Creation Methods 6:04 – Creating Gear List for Selected Objects 7:42 – Gear List Data Tab8:46 – Searching Components11:27 – Outro
Extra modelling flexibility has been introduced, making it possible to add any profile into the Bay inserted by the Item tool over the bay geometry. The feature enhances the intelligence of the bay significantly, allowing included profiles to follow the bay geometry changes in any direction. Copying/Moving/Rotating the bay with profiles included is
Timestamps 0:00 – Introduction0:10 – Direct Modification of Length on Vertical Tubes0:42 – Locked and Unlocked Points1:16 – Using Middle Point Handlers to Adjust Tube 1 and 2 Lengths1:23 – Outro
Timestamps 0:00 – Introduction0:31 – Stairs Properties1:00 – Independent Stairs Properties1:19 – Outro
Timestamps 0:00 – Introduction0:20 – Show (Draw) Bay Ends0:40 – Open, Closed End 1 (Left) and End 2 (Right) Options 1:25 – Open Without Inner Standard1:53 – Closed Without Inner Standard2:06 – Open Without Outer Standard2:18 – Rotate Standard in a Bay2:59 – Control Bay End Types Using Contextual Toolbar 3:26 – Outro
Timestamps 0:00 – Introduction1:10 – Object Level setting for General Arrangement Drawing Properties 3:31 – Creating Selection Filters 4:31 – Adding Rows 4:41 – Setting Category, Property and Value for Selection Filter5:19 – Setting a Filter for Specified Components 7:56 – Saving Filter6:13 – Setting Filter Type for all Drawings9:06 – Setting Colour
Timestamps 0:00 – Purpose0:50 – Inbuilt Features 1:28 – Naming Conventions 1:39 – Outro
Timestamps 0:00 – Introduction0:09 – Changing Sole Board Types 0:38 – Outro
Learning outcomes Eliminate a bay using Work area tool Delete and undo commands Selection of component using profile list Add components to a bay functionality Copy bay function Remove and Delete components from a bay commands Timestamps 0:00 Intro 0:15 Narrow the Work area 0:25 Delete the bay 0:27 Select component to be added to the bay 0:31 Undo
Timestamps 0:00 – Introduction0:32 – Lapping Bay to Tube and Clip1:55 – Wall Trace Tube and Clip to Lapping Bay 3:16 – Outro
Timestamps 0:00 – Introduction0:09 – Creating Top Ring 0:52 – Outro
Timestamps 0:00 – Types of Drawing Properties 1:09 – Hierarchy of Drawing Properties 2:30 – Creating 2 View Drawing 2:56 – General Arrangement Drawing Properties 3:16 – Exploring Drawing View Properties 3:50 – Part Properties in Drawing4:03 – Modification on Different Hierarchy in Drawing 5:08 – Modification on Lower Hierarchy Level6:04 – Settings
Timestamps 0:00 – Input and Picking Order2:22 – Model Demonstration 3:34 – Opening Preset Menu for Insertion 4:06 – Inserting Encapsulation on Selected Bays5:07 – Encapsulation Modification after Insertion 5:42 – Encapsulation Insertion on Right Side Open Bay5:54 – Encapsulation Insertion on Enclosed Bay6:02 – Encapsulation Insertion on Left Side Op
Timestamps 0:00 – Purpose of the Tool 0:22 – Naming Conventions0:38 – Direct Modifications Features 1:41 – Outro
Compatibility across ScaffPlan versions has been changed: Please note it is recommended to finalise all work in the current version of ScaffPlan you are currently in and start using version 1.4. only for new jobs. Models created in any previous version of ScaffPlan opened in ScaffPlan 1.4 might behave not as expected. Mode backup on opening has been
Users can create a lapping bay at the inner corner for 2 perpendicular bays. The option is available when the Outer Guardrail option is set to "Tube (at corners)" at a corner bay, and the Lapping bay the being inserted.
Timestamps 0:00 – Introduction0:28 – Wall Ties Overview 1:35 – Outro
Timestamps 0:00 – Introduction0:43 – Drawing Version1:18 – Opening a Drawing Version 2:24 – Deleted Drawing Recovery 3:37 – Outro
Timestamps 0:00 – Profile Positioning in 3D Space – Horizontals 2:06 – Profile Positioning in 3D Space – Verticals 2:36 – Profile Positioning in 3D Space – Start/End Points 6:35 – Positioning of a 3D Object Ideal7:21 – Positioning of a 3D Object Incorrect 8:02 – Positioning of a 3D Object After Conversion 9:04 – Outro
The speed of copying scaffolding components multiple times (from component to component ) has been significantly improved by the introduction of the ability to copy objects by specified number using the contextual toolbar for the Scaffold Item tool copying from component to component multiple times in any direction.
Timestamps 0:00 – Introduction0:31 – Primary Bay Length, Width and Height 1:24 – Building Offset 1:58 – Platforms and Lifts and Lifts Number 2:41 – Intermediate 1m Lift2:58 – Outro
Timestamps 0:00 – Introduction0:13 – Top Ring Creation0:36 – Outro
Learning outcomes Purpose of a tool presets How to configure save a tool preset Model(project) or system specific presets How to distribute a tool preset over the system Taking distributes presets into effect Timestamps 0:00 Purpose of a tool presets 0:52 How to configure save a tool preset 2:32 Model(project) or system specific presets 2:51 How
Timestamps 0:00 – Introduction0:07 – General Parameters0:35 – Typical Bay Configuration1:26 – Standard Sizes, Sole Boards and Top rings1:47 – Bird cage Contextual Toolbar 2:24 – Outro
Timestamps 0:00 – Introduction0:20 – Revision Command 1:40 – Deleting Revision 2:30 – Outro
Timestamps 0:00 – Introduction0:13 – Drawing Bay Ends1:09 – Drawing Profile Info 1:52 – Wall Trace Drawing 2:47 – Outro
Timestamps 0:00 – Introduction0:20 – Intermediate Ledgers at 1m Lift1:12 – Inner Ledger Options1:52 – Outer Ledger Options2:04 – End Ledger Without Decking Options 2:15 – Ledgers Control for a Bay with Decking3:13 – Outro
Timestamps 0:00 – Introduction0:24 – Ledgers and Transoms Overview 0:44 – L-Ledger1:07 – Intermediate 1m Lift1:31 – Outro
Timestamps 0:00 – Introduction0:32 – Drawing Creation 1:16 – Drawing View in 3D Model 2:21 – Cutting View Depth of 3D Model3:10 – Opening Drawing of Cut Model3:30 – Clip Around Selected Bounding Box 4:03 – Changing View Angle 4:26 – Update and Open Drawing 4:43 – Reverse View Direction4:47 – Rotation Angles 5:04 – Outro
Extra option for sole boards added allowing users to control sole board types from the Circular Tank, Bird Cage, Start and Wall Trace tool user interface. Timber and steel board options are available now.
Timestamps 0:00 – Introduction0:27 – Insert PDF Reference Model Command Overview 1:10 – Finding Reference Model to Import 1:25 – Page Number 1:37 – Placing Reference Model 2:05 – Opening Reference Model Scale Tool2:31 – Pink Point of Reference Model2:45 – Actual Length Input3:07 – Moving Reference Model 3:24 – Double Checking Scale3:47 – Reference M
Timestamps 0:00 – Introduction0:10 – Encapsulation Overview 0:37 – Encapsulation Creation 1:36 – Encapsulation for Bigger Bay Projects3:30 – Outro
Timestamps 0:00 – List of Videos to Watch0:40 – Wall Trace Tool 0:49 – Layout1:02 – Corner Arrangement 1:13 – Lapping Bay Configuration1:22 – Bay Configuration1:55 – Standard Sizes 2:04 – Sole Board2:07 – Ledgers / Transoms and Guardrails2:12 – Bracing 2:22 – Top Ring and Console Brackets2:27 – Encapsulation and Containment Mesh2:38 – Wall Ties2:47
Timestamps 0:00 – Introduction0:40 – Importing an IFC Reference Model1:32 – Reference Model Properties2:02 – Moving Reference Models2:30 – Move Special Rotate 2:58 – Importing a SketchUp Reference Model3:37 – Outro
Timestamps 0:00 – Inputs0:44 – Picking Order for Calculations 2:16 – Outputs3:41 – Reports Location 4:06 – In Model Example 4:38 – Run Calculations Command 5:58 – Vertical Loads Reports 7:14 – Run Calculations for Whole Bay 7:56 – Vertical Loads Reports for all Bays8:45 – Outro
Timestamps 0:00 – Introduction0:14 – Inserting Transoms 1:13 – Measuring Curved Transom Piece 1:35 – Changing Work Plane to Transom Piece 2:09 – Using Polybeam to Model Curved Piece 3:06 – Polybeam Material and Rotation 4:00 – Creating Construction Line to Model Tube Piece 4:19 – Inserting Plate for Tube Piece 4:51 – Changing Plate Size and Position
The Temporary roof tool automates modelling process of temporary roof structures. Layher Keder Roof XL is one of the first roof system comes into ScaffPlan. As a one click solution the tool allows to model the whole roof system in one go by predefined parameters such: - width and nominal width of the roof - support type - number of roof frames - b
The Bay tool now supports sloping ground conditions. The feature is available on the contextual toolbar of the Bay tool. Preview on the insertion displays: - number of bays to be inserted - total length of the bay line - length & width of bays being used - top working platform height
O-Proscaf and U-Proscaf scaffolding systems have been introduced with all ScaffPlan tools available. Engineering module for the Proscaf system is not supported yet.
Timestamps 0:00 – Introduction0:17 – Wall Layout Tool Insertion 0:35 – Modifying Walls with Points1:23 – Adjusting Wall Height2:15 – Panel Insertion 2:54 – Inserting Plate for Tilted Wall 3:25 – Plate Modification 3:57 – Moving Points on Axis (Tilting Wall)5:45 – Outro
Timestamps 0:00 – Introduction0:24 – Inner Top Guardrails1:07 – Outer Top Guardrails 1:35 – Adjust Building Offset 2:28 – Outro
Timestamps 0:00 – Insertion1:18 – Direct Modification 2:33 – Model Demonstration3:22 – Setting Up Construction Line 4:49 – Inserting Wall Tie 5:31 – Wall Tie Properties and Copying 6:30 – Wall Tie Location7:22 – Outro
Timestamps 0:00 – Insertion: Forming Circular Tank Layout1:00 – Insertion: Naming Conventions 1:32 – Insertion: Direct Modification Features 2:19 – Insertion Demonstration 3:07 – Modifying Tank Location for Bay after Insertion4:28 – Tank Bay Contextual Toolbar5:33 – Outro
Timestamps 0:00 – Introduction0:08 – Ribbon Navigation Mode 1:12 – Ribbon Minimized 1:32 – Modelling Tab 7:49 – Scaffold Design 13:05 – Engineering 14:05 – Project Management 14:51 – Drawings 15:56 – Help
Timestamps 0:00 – Introduction0:12 – Exporting Drawings as DWG/DXF1:18 – Exporting Options 4:47 – Layer Rules 6:54 – Opening DWG in CAD 7:33 – Outro
Timestamps 0:00 – Introduction0:20 – Automatic Standard Sizes Option 0:45 – Custom Standard Sizes for a Bay (Set Standard Size, 3m Standards)1:17 – Outro
Timestamps 0:00 – Introduction0:07 – Scaffolding System List in the Project Properties0:25 – Scaffold System Units and Decimal Places0:58 – Selecting Scaffolding System to Use2:52 – Hide or Show Decimal Places Menu Using User Setting JSON File 4:04 – Outro
Timestamps 0:00 – Introduction0:40 – Drawing Creation1:20 – Showing Reference Models in Drawing3:03 – View Specific Properties3:42 – Separating IFC and PDF 5:01 – Outro
Timestamps 0:00 – Introduction0:21 – Inserting Scaffold Items1:38 – Converting Items Back to Scaffold Item Tool2:55 – Scaffold Items in a Bay4:06 – Whole Bay Conversion 4:57 – Outro
Timestamps 0:00 – Introduction0:20 – Purpose and Benefits of the Item tool1:19 – Outro
Timestamps 0:00 – Introduction0:25 – Wall Tie Overview0:50 – Create Wall Tie 1:10 – Change Wall Tie type3:03 – Outro
Timestamps 0:00 – Introduction0:37 – Neighbor Bay Option Overview1:40 – Move Neighbor Bay at End 1 or End 23:55 – Move Neighbor Bay Options Using Contextual Toolbar5:06 – Adjusting Neighbor Bay Length at End 1 or End 26:26 – Outro
Timestamps 0:00 – Introduction0:15 – Top Working Platform Height Line and Platform Elevations0:37 – Top Working Platform Height Line Display Options 0:46 – Display Top Working Platform Height or Lift Heights 1:16 – Custom Lift Height and Deck Creation / Removal with Handlers2:10 – Move Bay by Reference Line / Outer line / End 1 or End 2 Line Handler
Timestamps 0:00 – Introduction0:29 – Create a New Model0:54 – Open Model 2:17 – Save Model 3:06 – Printing 3:25 – Open Model Folder3:44 – Import5:07 – Export 6:44 – Sharing 7:52 – Trimble Connect 8:09 – Project Properties 9:07 – Settings14:02 – Catalogues16:04 – Editors 16:59 – Logs17:32 – Diagnose & Repair 18:38 – Help 19:27 – Extend 20:22 – Ex
Timestamps 0:00 – Introduction0:25 – Reference Model Menu1:12 – Reference Model Presets2:00 – Reference Model File Location2:43 – Reference Model Groups 2:53 – Reference Model Insertion Location 3:11 – Reference Model Offset 3:42 – Reference Model Scale 3:59 – More Tab 4:10 – Adding Model 5:03 – Exploring Imported DWG Model5:41 – Measuring DWG Scale
Timestamps 0:00 – Introduction 0:10 – Radial grid command location on the ribbon0:17 – Insert a radial grid0:31 – Move a grid0:48– Radial and Angular options, check grid angles (measure an angle command)2:20 – How to modify the radial grid3:47 – Outro
1. How to interrupt a command from running. Any command after it’s use required to be interrupted to start using any other tool. After a tool or command executed please Right click and press Interrupt to stop the command from running. A shortcut is the button on the keyboard. 2. Switch to the 3D or plane view. It is sometimes convenient to see a
Timestamps 0:00 – Introduction 0:34 – Model a ramp or slab by a polybeam0:17 – Insert a radial grid1:48 – How to round a polybeam (arc and rounding options)2:39– Define thickness and width of a ramp (slab or polybeam) 3:06– How to extend a ramp or slab created by polybeam3:37 – Create a semi-circular wall4:21 – Create a ramp by spiral beam (spiral r
Timestamps 0:00 – Introduction1:03 – Creating Points on Line1:35 – Points on Plane3:13 – Points Parallel to Two Point 3:59 – Points Along Extension of Two Points4:34 – Projected Points on Line 5:05 – Points Along Arc Using Centre and Arc Points6:41 – Along Arc Using Three Arc Points 7:15 – Tangent to Circle Point7:47 – Points at Any Position8:11 – P
Timestamps 0:00 – Introduction0:17 – Bay Length and Width Adjustments for the Wall Trace1:11 – Top Working Platform Height and Bay Building Offset1:49 – Platforms at Lifts and Number of Lifts 2:45 – Outro
Users can now create, introduce and distribute over the system setup any company-specific scaffolding component or other required shapes. The Custom Item Tool, together with the Editing ribbon, contains a set of modelling tools that allow users to develop custom components from scratch using native Tekla objects, or based on provided component templ
Timestamps 0:00 – Introduction0:17 – Bay Configuration Settings0:24 – Change Bay Length and Width0:48 – Change Bay Length Using Contextual Toolbar 1:37 – Change Bay Width Using Contextual Toolbar 1:52 – Change Top Working Platform Height3:20 – Change Building Offset 4:05 – Platforms at Lifts 5:35 – Lifts Number Option5:48 – Outro
Timestamps 0:00 – Introduction0:08 – Safe Working Limits Command 0:30 – Outro
Timestamps 0:00 – Introduction1:05 – Modelling Scaffold Component1:46 – Mirror Scaffold Component3:32 – Mirroring with Changed Work Plane4:48 – Scaffold Component Rotation 5:59 – Rotating Around Changed Work Plane7:42 – Outro
Timestamps 0:00 – Introduction0:18 – Single Stairs Settings0:37 – Top Guardrail1:05 – Flipping Stairs 1:17 – Riser Location 1:28 – Stairs Shade Cloth1:42 – Stairs Encapsulation 2:32 – Stretcher Stairs Modification3:47 – Independent Stair Towers 4:37 – Outro
Timestamps 0:00 – Intro0:12 – Inserting Tube and Clip0:22 – Using Contextual Toolbar0:43 – Adding Connection from Contextual Toolbar1:12 – Interrupting Command1:18 – Repeating Connection Process 1:30 – Adding Connection on Bracing1:47 – Adding Connection on Lattice Beam1:56 – Adding Couplers on Cross Braces2:11 – Measuring Swivel Coupler2:29 – Movin
Compatibility with Tekla Structures versions and service packs Tekla Structures 2020 Service Pack 13 Tekla Structures 2021 Service Pack 9 Key Features AT-PAC US System AT-PAC AU System Select components from intelligent tools Add to bay functionality Show, detach and remove added profiles Change profile type from the contextual toolbar Copy pr
Timestamps 0:00 – Introduction0:13 – Modelling Concrete Polybeam0:38 – Slab Points Interactions1:28 – Modelling Curved Slab1:44 – Slab: Corner points for Rounding (Chamfer Points)2:13 – Curved Concrete Polybeam 2:24 – Concrete Polybeam: Corner Points for Rounding (Chamfer Points) 2:44 – Concrete Polybeam: Drag and Drop Edges Reshaping a Slab3:00 – O
Timestamps 0:00 – Components Modelled Over a Bay Concept0:52 – Select Similar and Profile List for Components 1:08 – Add Components to a Bay 1:30 – Copy a Bay with Added Components1:43 – Replace Component in the Bay Concept2:53 – Copy a Bay with Replaced Component3:10 – Highlight Components Added to the Bay (Added items)3:30 – Exclude Picked (Exclud
Timestamps 0:00 – Introduction0:28 – Top Ring Option 0:56 – Top Ring with Ledgers/Transoms1:54 – Top Ring with Guardrails3:07 – Top Ring with Console Brackets4:30 – Outro
Ease of modelling has been enhanced by introducing Copy Same Object command on the contextual toolbar for the Item Tool, allowing users to copy a component from end to end rapidly by a specified number of copies.
It is possible to achieve any Tube&Fittings scaffold projects by utilising the powerful intelligence of the Scaffold Item tool.
Learning outcomes Copy to another object command
Timestamps 0:00 – Introduction0:10 – Copying Scaffold Bay2:04 – Moving Scaffold Bay3:16 – Copying and Moving Overview3:54 – Outro
Extra Tube&Fittings components have been added to catalogs as well as modeling intelligence enhanced bringing the ability to achieve any Tube&Fittings projects. Direct creation of the following components added from a tube: • Steel and timber base plates • Board retention clip • Double coupler • Swivel coupler • Putlog coupler • External Jo
Timestamps 0:00 – Introduction0:10 – Calling Scaffold Item Tool Menu1:15 – Scaffold Item Tool User Interface 1:52 – Scaffold Tool Save Settings 3:03 – Scaffold Item Type and Profile (Component)4:43 – Inserting Component in Model5:17 – Searching Ledger in Item Tool5:43 – Inserting Ledger6:10 – Component Positioning in Item Tool 8:35 – Component Prev
Timestamps 0:00 – Introduction0:15 – Containment Mesh Overview 0:59 – Creating Containment Mesh 1:33 – Creating Containment Mesh for Bigger Bay Projects 2:26 – Outro
Timestamps 0:00 – Introduction0:10 – Console Bracket Location0:49 – Console Bracket Types 1:36 – Automatic Tube and Clips and Planks2:03 – Removing Inner Guardrails2:39 – Outro
Timestamps 0:00 – Introduction0:06 – Add and Remove Decks at Lifts (Platforms at Lifts)0:48 – Deck Creation by Deck Handlers1:06 – Add and Remove Decks at Lifts for Multiple Bays Selected1:40 – Set Custom Platform Heights for a Bay2:20 – Set Custom Platform Heights for a Multiple Bays 2:56 – Outro
Compatibility with Tekla Structures versions and service packs Tekla Structures 2020 Service Pack 13 Tekla Structures 2021 Service Pack 9 Key Features AT-PAC EU System Buttress Bay Tool FlexBeam components for the U-Layher system Copy components multiple times by number Bay with no Decking Creation of Planks by Input Lapping Bay - Tubes and Co
Timestamps 0:00 – Inserting Tube Connector0:21 – Multiple Components Options0:35 – Insertion Picking Points0:54 – Interrupting Command1:03 – Using Multiple Components Feature1:28 – Using Temporary Snap1:55 – Inserting Components with Offset2:09 – Inserting Components on top of Each Other2:25 – Outro
Timestamps 0:00 – Intro0:07 – Opening Tube and Clip0:17 – Preset Tube and Clip Before Insertion 0:28 – Insertion of Tube and Clip0:44 – Opening Tube and Clip Dialogue Box1:00 – Menu Dialogue Overview1:11 – Saving and Loading Presets1:29 – Creating Named Preset2:06 – Exiting Dialogue Box 2:14 – Using the Get and Modify Button2:49 – Tick Boxes Button3
Timestamps 0:00 – Intro0:38 – Opening Tube and Clip Properties 1:00 – Insertion of Tube and Clip1:32 – Interrupting Tool1:41 – Using Temporary Snap for Offset Insertion2:11 – Using Contextual Toolbar to Show Dimensions2:27 – Forming Braces with Double Couplers2:37 – Adding Coupler to Tube3:02 – Using Custom Item Tool for Tube3:13 – Inserting Tube an
Extra bracing options for the Bay Tool have been developed, making it possible to control the positioning of bracing at each side of the bay separately (Inner, Outer, End1, End2).
Timestamps 0:00 – Introduction0:14 – Horizontal Dimensioning 1:20 – Vertical Dimensioning2:00 – Changing UCS 2:57 – Orthogonal Dimensioning 3:32 – Perpendicular Dimensioning 3:55 – Parallel Dimensioning 4:12 – 3D Dimensioning 4:41 – Angular Dimensioning 5:15 – Radial Dimensioning 5:59 – Arc Dimensioning 6:54 – Grid Line Dimensioning 7:24 – Outro
Timestamps 0:00 – Introduction0:24 – Finding Background Files1:12 – Outro
Timestamps 0:00 – Introduction0:10 – Sole Board types 0:33 – Outro
Timestamps 0:00 – Introduction0:08 – Scaffold Bay Bracing Creation0:48 – Bracing Position and Direction1:34 – Create Bracing Using Bay Contextual Toolbar2:36 – Outro
Timestamps 0:00 – Introduction0:07 – Showing Snapping Points for Couplers0:26 – Using Coupler Snapping Points for Insertion0:39 – Measure Tube1:02 – Toggling which end are Modified1:22 – Adjusting Overhang with Locked Coordinate1:44 – Opening Command with Shift2:04 – Using Couplers as Snapping Points2:11 – Direct modification of Length on End Points
Timestamps 0:00 – Introduction0:08 – Using Contextual Toolbar to Change Coupler Settings0:34 – Adding Coupler to Tube0:57 – Changing Hierarchy to Individual Tube Level1:05 – Creating Individual Coupler from Tube Options1:47 – Outro
Timestamps 0:00 – Introduction0:19 – Intermediate 1m Lifts 0:58 – End Ledgers Without Decking1:32 – Outro
Timestamps 0:00 – Introduction0:21 – Selected Documents1:07 – Outro
The convenience of modelling has been significantly enhanced by introducing direct access to the Item tool on any profile selected inside of Bay, Wall Trace, Tank, Bird Cage, Buttress Bay and other intelligent tools. The extra hierarchy level introduced allows direct access to the Item tool user interface, including all features of the Item tool on
Timestamps 0:00 – Introduction0:24 – Length, Width and Height0:55 – Building Offset1:01 – Platform at Lifts and Lift Number 1:48 – Outro
Timestamps 0:00 – Introduction0:11 – Adjusting Standard Sizes (3m Standard)1:07 – Outro
It is now much easier to trace over reference models imported into ScaffPlan.
Timestamps 0:00 – Introduction0:46 – Purpose and Benefits of the Wall Trace Tool1:46 – List of Videos to Watch Prior 2:15 – General Concept 5:08 – Hierarchy of the Wall Trace Tool10:01 – Outro
Timestamps 0:00 – Purpose0:39 – Inbuilt Features 1:08 – Outro
Timestamps 0:00 – Introduction0:13 – Hiding and Showing Snapping Points 0:35 – Snapping Points Overview1:10 – Redraw View (Hiding Snapping Points)1:31 – Creating Ledgers 2:25 – Snapping Ledger to Spigot 3:04 – Snapping Points Overview3:55 – Outro
Timestamps 0:00 – Introduction0:31 – Snapping Switches1:00 – Snapping Around Object 1:09 – Snap Toolbar Overview1:20 – Snapping Points and Grid Intersections1:36 – End Points 1:57 – Snapping to Centre Points 2:10 – Snap to Midpoints2:34 – Snap to Perpendicular 2:53 – Snap to Extension Lines 3:03 – Snap to Any Position 3:25 – Snap to Geometry Lines4:
Timestamps 0:00 – Handover & ScaffTag Certificates0:22 – Certificates Inputs0:48 – Reports Location 1:18 – Certificate Overview in Model3:19 – ScaffTag Overview4:11 – Outro
Timestamps 0:00 – Introduction0:12 – Model Snapshot Overlay1:48 – Drawing Snapshot Overlay 3:16 – Outro
Timestamps 0:00 – Introduction0:08 – Drawing Overview2:06 – Copying Drawing from Document Manager3:04 – Link Drawings from Document Manager3:59 – Moving Views 5:31 – Outro
Timestamps 0:00 – Introduction0:42 – Document Manager Overview 2:26 – Outro
Timestamps 0:00 – Introduction 0:22 – Grid Properties3:14 – Moving and Creating New Grids5:12 – Modifying Grid8:24 – Adding Grid Lines 11:44 – Saving Grid Settings12:28 – Outro
Timestamps 0:00 – Drawing Layout 1:47 – Drawing Title Block5:14 – Drawing Views 5:50 – Creating Drawing in Model 6:10 – Drawing Format Overview 6:33 – Project Information Modification 7:32 – Creating Drawing Revision Handling8:14 – Creating Another Revision Handling 8:26 – Modify Revision Handling9:13 – Editing Project Information 9:21 – Client an
Learning outcomes Create an F-tie Create a Box tie Timestamps 0:00 – Introduction 0:16 – Create a horizontal F tie on wall side (one leg or double leg tie) 4:26 – Create a vertical F tie on an opening 6:43 – Create a box tie
Timestamps 0:00 – Introduction0:27 – Inserting Text Inside and Outside Model View1:15 – Text Appearance 2:00 – Text Frame 2:15 – Super Script2:51 – Text Framing3:11 – Saving Text Properties3:56 – Rich Text4:15 – Finding Rich Text File4:42 – Inserting and Modifying Rich Text5:14 – Text Sizing and Colour5:53 – Outro
Timestamps 0:00 – Introduction0:10 – Calling Bay Tool Dialog0:42 – Save and Load Bay Tool Preconfigured Settings1:16 – Help Menu Button1:23 – Navigation in the Bay Tool Dialog1:35 – Bay Cancel Button1:44 – Tick on/off Boxes in the Bay Dialog2:00 – Get Button in the Bay Menu (Update the Bay Tool Dialog by Get Button)2:41 – Modify Button in the Bay Me
Timestamps 0:00 – Introduction0:20 – Changing Units 0:57 – Outro
Timestamps 0:00 – Introduction0:10 – Work Area and View Depth0:33 – Temporarily Hide the Work Area Box0:50 – Copying Object Outside of the Work Area1:52 – Expand Work Area After Copying Objects 2:16 – Fit Work Area Using Two Points3:50 – Fit work Area to Entire Model4:04 – Fit Work Area to Selected Parts5:27 – Outro
Timestamps 0:00 – Introduction0:20 – Inserting and Copying Standards with Offset1:19 – Creating Base Plates2:04 – Create Ledgers 3:04 – Copying Components Vertically and Changing Profiles4:02 – Creating Transoms and Decking 4:43 – Creating Toe Boards and Guardrails4:48 – Creating Console Brackets with Decking6:44 – Creating Bracing7:10 – Outro
Timestamps 0:00 – Introduction0:09 – Copying Component in Locked Direction0:36 – Outro
Timestamps 0:00 – Introduction0:23 – Purpose and Benefits1:03 – List of Videos to Watch Prior 1:32 – General Concept 3:03 – Hierarchy of the Bird Cage Tool4:26 – Demonstration 7:11 – Outro
Timestamps 0:00 – Topics0:27 – Purpose1:05 – General Concept 1:38 – Inputs2:28 – Outro
Timestamps 0:00 – Introduction0:22 – Direct Modification Setting1:14 – Changing Component Length from the Start Point 2:39 - Changing Component Length from the End Point2:55 – Moving Profile with Centre Line3:59 – Copy a Component with a Modular Distance by Using its Centreline4:17 - Copy Multiple Components with a Modular Distance by Using its Cent
Timestamps 0:00 – Introduction0:22 – X, Y, Z Planes 1:17 – Work Area 1:48 – Top Bar Commands 2:24 – Ribbon Tabs3:21 – Top Bar and Model Info 4:06 – Windows Tab 4:25 – Right Side Tabs 6:15 – Work Plane Handler 6:37 – Search in Model 7:03 – Bottom Toolbars 8:18 – Status Bar 9:34 – Outro
Timestamps 0:00 – Introduction0:18 – Purpose and Benefits of the Lattice Beam Tool0:52 – General Concept 4:18 – Outro
O-Cuplock and Omega-Cuplock scaffolding systems have been introduced with all ScaffPlan's tools available.
It's now possible to quickly access the Neighbour bay adjustment option, which was previously only available from the Bay tool UI only, from the contextual toolbar, allowing for an enhanced user experience and increased modelling speed.
Timestamps 0:00 – Introduction0:07 – Custom Item Tool0:27 – Convert Parts to Item 0:39 – Convert Reference Model to Item 0:59 – Attach/Detach Part and Explode 1:12 – Cutting Commands 1:41 – Outro
Timestamps 0:00 – Introduction0:20 – Contextual Toolbar Overview0:49 – Populating Contextual Toolbar 0:56 – Component (Profile) Type1:14 – Changing Component Standard 1:40 – Creating Other Components (Profiles) from Components (Profiles)2:05 – Copying Component Properties 2:22 – Component Rotation 2:26 – Swapping Standards 2:50 – Sole Board Contextu
Extra create connections commands added to FlexBeam components for faster and more intelligent modeling output handling any support or suspension cases of the FlexBeam with ease.
Timestamps 0:00 – General Concept and Inputs0:51 – Outer Corner – Option 15:30 – Outer Corner – Option 210:26 – Outer Corner – Option 313:11 – Outer Corner – Option 416:15 – Outro